NEI
CRAS Log e Comex (Petrópolis, Rio de Janeiro)
CRAS Log e Comex

Cable Cleat com Dobradiça de Aço Inox para Trabalhos Pesados - Sovereign

  • Cable Cleat com Dobradiça de Aço Inox para Trabalhos Pesados - Sovereign
  • Cable Cleat com Dobradiça de Aço Inox para Trabalhos Pesados - Sovereign

Descrição do produto

The CMP Products Sovereign cable cleat range consists of metallic cable cleats which have been designed, constructed, and tested in accordance with the International Standard ‘cable cleats for Electrical Installations’ IEC 61914:2009. The Sovereign cable cleat has been designed and tested for high short circuit conditions on cables held in trefoil application / formation, to ensure the securing and retention of cables without damage.

The Sovereign cable cleat is available for trefoil application / formation for diameters of 19mm to 128mm in 23 sizes. The cable cleat is fabricated from 316L stainless steel, giving it high creep strength whilst providing excellent corrosion resistance in the harshest of environments.

The Sovereign cable cleat has one M12 and two M10 fixing clearance holes within its base, allowing versatility to the installer during installation, and is designed to enable the product to be secured to a variety of mounting surfaces. The Sovereign cable cleat hinge opens fully, allowing the cables to be easily placed within the cable cleat, to aid the installer before closing and securing via the mouth piece bolt.

Low Smoke & Fume (LFS), Zero Halogen (LS0H) and Phosphorus Free liners are standard helping to restrain the cables within vertical applications, providing a layer of protection between the cable sheath and the cable cleat during normal operation, where thermal elongation of cable occurs, protecting the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications. The Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free liners also assist in the extra protection of cables in the event of short circuit fault conditions.

  • Third party certification to IEC 61914:2009
  • T316L stainless steel
  • T19 – 128mm in 23 sizes for trefoil formation / application
  • TShort circuit rating of 190kA peak fault
  • TOperating temperature -50°C to +60°C
  • TLow Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free liners as standard
  • TCombined single (M12) and two bolt (M10) fixing design


  • Para mais informações, baixe o catálogo em PDF PDF


    Modelos

    * - Clique no respectivo modelo para mais informações.
    Modelo* Certificação Diâm. Furo de Fixação (D1) Diâm. Furo de Fixação (D2) Diâmetro do Cabo Dimensão (D) Dimensão (H) Dimensão (P) Dimensão (W) Peso Temp. de Operação Tipo
    HDSS019023 IEC 61914:2009 2 x M10 1 x M12 19 ~ 23 mm 54 mm 87 mm 25 mm 100 mm 417 g -50 ~ +60 ºC 6.1.3 Composite HDSS - Heavy Duty Stainless Steel
    HDSS023028 IEC 61914:2009 2 x M10 1 x M12 23 ~ 28 mm 54 mm 88 mm 25 mm 104 mm 450 g -50 ~ +60 ºC 6.1.3 Composite HDSS - Heavy Duty Stainless Steel
    HDSS027032 IEC 61914:2009 2 x M10 1 x M12 27 ~ 32 mm 54 mm 97 mm 25 mm 106 mm 465 g -50 ~ +60 ºC 6.1.3 Composite HDSS - Heavy Duty Stainless Steel
    HDSS030035 IEC 61914:2009 2 x M10 1 x M12 30 ~ 35 mm 54 mm 103 mm 25 mm 108 mm 473 g -50 ~ +60 ºC 6.1.3 Composite HDSS - Heavy Duty Stainless Steel
    HDSS033038 IEC 61914:2009 2 x M10 1 x M12 33 ~ 38 mm 54 mm 107 mm 25 mm 110 mm 485 g -50 ~ +60 ºC 6.1.3 Composite HDSS - Heavy Duty Stainless Steel
    HDSS036042 IEC 61914:2009 2 x M10 1 x M12 36 ~ 42 mm 54 mm 108 mm 50 mm 132 mm 570 g -50 ~ +60 ºC 6.1.3 Composite HDSS - Heavy Duty Stainless Steel
    HDSS040046 IEC 61914:2009 2 x M10 1 x M12 40 ~ 46 mm 54 mm 113 mm 50 mm 134 mm 581 g -50 ~ +60 ºC 6.1.3 Composite HDSS - Heavy Duty Stainless Steel
    HDSS044050 IEC 61914:2009 2 x M10 1 x M12 44 ~ 50 mm 54 mm 121 mm 50 mm 136 mm 594 g -50 ~ +60 ºC 6.1.3 Composite HDSS - Heavy Duty Stainless Steel
    HDSS048055 IEC 61914:2009 2 x M10 1 x M12 48 ~ 55 mm 54 mm 127 mm 50 mm 138 mm 616 g -50 ~ +60 ºC 6.1.3 Composite HDSS - Heavy Duty Stainless Steel
    HDSS051058 IEC 61914:2009 2 x M10 1 x M12 51 ~ 58 mm 54 mm 130 mm 75 mm 140 mm 627 g -50 ~ +60 ºC 6.1.3 Composite HDSS - Heavy Duty Stainless Steel

    Envie sua cotação para a empresa

    Seus dados serão enviados às empresas para que elas retornem sua cotação.

    Seus dados serão enviados às empresas para que elas retornem sua cotação.